Our company built the ICCP project of the world's largest and most advanced h457 havfarm1 deep-water aquaculture Vessel for Yantai CIMC Raffles Offshore Limited, for which the enduser is Nordlaks . on April 1,2020 successfully completed the delivery ceremony.

         Havfarm1 Deepwater Aquaculture Vessel project, total length 385 meters, model width 59.5 meters, model depth 65 meters, including 6 deep water cages, this project is fixed by the way of single point mooring of the outer transfer tower, The whole ship adopts steel beam truss with complex structure ,the design life is 30 years, therefore, the anticorrosion requirement is extremely strict.

         On the designing of the cathodic protection, our company has adopted many of the most advanced ICCP technologies around the world , such as cathodic protection simulation calculation, underwater replacement anode and reference electrode, intelligent transformer rectifier,  transformer rectifier master-slave control, RS485 and Ethernet joint communication, centralized control, data on-site and remote transmission to IAS control center of the whole ship. Through bidding with Norway MME, Italy ACG, Korea KC and many other well-known international cathodic protection companies, during appraisal through comparison of the advancement and reliability protection design scheme, convenience of use, cost control and so on, we finally won the bidding. 

          For the whole project, 3,000A current cathodic protection capacity were designed, and also installed with multiple auxiliary anodes and reference electrodes. Each circuit of anode current, reference potential, fault and alarm information, all of these can realize local and remote display and control processing. Within less than six months after signing the contract, our company has overcomed all kinds of difficulties which never encountered beofore, such as short time, the influence of covid-19 epidemic situation. And meanwhile ,overcomed the  difficulties of many  complex structure, narrow space, several kinds of signal interference, centralized and coordinated control of multiple ICCP control systems, and finally reached all the design targets, and got consistent approval from shipowners, design institutes and shipyards and accomplished the vessel delivery soomthly. In the process of design, manufacture and commissioning and acceptance of the project, our company has fully demonstrated the overall strength of the company's applied ICCP system in the international market. We believe that in the future in the development and application of cathodic protection technology, we will continue lead the development of the international market in this technical field.

Sep.2019, CNOOC(China) Limited Tianjin Branch, together with CCS, carried on factory audit and review to our company.
April 25,2019 , business development top managers from BORIN Manufacturing, Inc came to visit our company. During this meeting, Borin and we R-SS discussed the China distributor authorization matter, and meanwhile, they gave a wonderful presentation about Borin products, this is also a great opportunity for technical exchanges. We have received the distributor agreement soon after the visit.
Our representatives attend the Corrosion conference & Expo of 2019 in Nashville, Tennesse , USA.
Exhibition arrangement completed, we’re ready !
Communicate with foreign customers
Beijing, June 1st, JingJiWang of China’s reporter You Qing and intern reporter She HuiMin reported:"corrosion status of our country and the control strategy research" work conference held today in Beijing.Project's chief scientist, member of Chinese academy of sciences institute of Marine BaoRong Hou report on behalf of the team. Research shows that, in 2014 China's total costs in corrosion including the costs of loss in corrosion and anti-corrosion protection is more than 2.1 trillion yuan, approximately 3.34% of China’s GDP, equivalent to every Chinese bears corrosion costs of 1555 yuan per year. BaoRong Hou academicians pointed out that the corrosion is security issues, economic issues and ecological civilization, corrosion protection is an important part of the development strategy of "Area", corrosion prevention control strength is a reflection of civilization and prosperity of a country.
On March 25, 2017, CORROSION 2017 officially open!As of 18:00 PM (New Orleans), registered a small peak, the total number of registered more than 2749 people.From the Chinese engineers, technicians and inspectors, instructor, and so on corrosion experts.On the afternoon of March 26 mollier convention center, CORRSOION 2017 held a grand opening reception.NACE China CEO, Bob Chalker corrosion of 2017 annual welcome speech.Conference into a lot of new elements, corrosion experts and scholars from all over the world gathered, communication technology and the cooperation, we hope the conference a complete success!
CORROSION of 2017,We Come
On March 25, 2017, CORROSION 2017 officially open!My company active participation, exchanges and cooperation with colleagues around the world!During the exhibition shows the our company good spirit!

The First China-U.S. Anti-corrosion Standards Seminar Was Held In Beijing

America's trade development, the American national standards association, the American association of corrosion engineers, China industrial anticorrosion technology association, the national anti-corrosion standardization technical committee on November 7, 2013 in Beijing hosted the first seminar corrosion protection standard of China and the United States.More than 120 participants listened to the keynote speech of liu ping, the deputy director of the general administration of quality supervision, and other eight experts.

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​Corrosion 2018 is held at Phoenix Convention Center of USA on April 15-19, our participants come with our new products, exchange ideas and express our willing to cooperate with people in corrosion filed all around the world. As always, we continue to strive for R-SS excellence.

On August 16th, CEO, top managers & engineers from Cathelco Limited visit our company in Qingdao. During the meeting, we introduced four new products, also reported our quality records from Jan. of 2018 till now, Cathelco affirmed our effort and improvement. In the meantime, they also give us some suggestions for new developments. This is a very fulfilling meeting for both sides.



​​​​​​​​​​​​​​​​​​​​​​​​​​​

Corrosion Technology Week (CTW)  will be held on Sep 16-20, 2018 ,which is an annual "work week" for members of NACE International technical committees. Sponsored by the Technical Coordination Committee, this event includes a series of meetings focused on methods of identifying, preventing, and combating corrosion problems across all major industries.


Technical Information Exchanges enable committees to stay on the cutting edge of innovation and technology in the corrosion industry. These meetings also provide a forum for sharing information and solutions to corrosion challenges encountered around the world.

The 17th Middle East Corrosion Conference and Exhibition (MECC) will be held during 30 September – 3 October 2018, at the Bahrain Exhibition Center, in the Kingdom of Bahrain. The event is organized by NACE Dhahran Saudi Arabia Section, NACE West Asia & Africa Area and the Bahrain Society of Engineers.

The MECC has steadily expanded since its inception to become a globally leading conference in the area of corrosion management. For the last years, the event proved to be an ever evolving platform with opportunities for industry leaders, corrosion engineers, manufacturers, and service providers to exchange best practices, expand working network, and showcase products and services in corrosion prevention. The number of professional and industrial delegates has steadily grown to cover all aspects of corrosion with representatives from the four corners of the globe.